A complete set of an impact roller typically includes the roller itself, along with any necessary mounting brackets, bearings, and other components required for installation.
Basic Parameters of SL30/SL25 Impact Roller
Model SL30/SL25
Impact energy 30KJ/25KJ
Component quality 11.6-16T
The optimal speed range is 10-15Km/h
Minimum turning radius 5800mm
Compaction degree 95-98%
Number of shock absorbers 12 × two × 3
Overall dimensions (length × wide × High) 3880 × two thousand nine hundred and sixty × 2360mm
Wheel base 1160mm
Steel wheel width 900mm
Damping method: hydraulic, nitrogen, spring, rubber, shock absorber
Accumulator at atmospheric pressure of 3~4.5Mpa
Tire normal pressure 0.6~0.8Mpa
Product features:
SL320/310 special tractor+SL30T/SL25T impact compaction wheel, basic configuration and parameters are as follows:
1. The tractor has a total weight of about 14 tons, with a rear engine design that provides a wide field of view, a lightweight and flexible structure, and is economical and affordable;
2. Special gearbox for impact rollers, with a speed ratio that matches the construction speed of the impact roller;
3. Professionally designed seats and specially designed cab cushions, fully adapted to the bumpy construction environment of impact rollers;
4. The height of the impact compaction wheel is 2450mm (the larger the wheel shape, i.e. the greater the drop, the greater the impact force)
5. The impact compaction wheel SD30T weighs 16 tons and YCT30T weighs 13.7 tons (when the wheel shape is consistent, the larger the weight, the greater the impact force);
6. The total width of the impact roller design is 2960mm (if the total width exceeds 3000mm, precise loading cannot be achieved, and exceeding the width will increase additional transportation costs);
7. The width of a single impact roller is 900mm (after the wheel is widened, in addition to reducing the impact force, there are also two major drawbacks);
8. Adopting a fully hydraulic buffering and increasing speed system (accumulator, buffering oil cylinder, double layer protective hydraulic pipeline) increases the protection performance of the impact compaction wheel and tractor;
9. The spiral compression spring and reverse rotation tension spring on the traction shaft cushion and assist in eliminating the impact force of the impact roller on the traction vehicle, further adjusting the speed of the impact roller;
10. The third generation lifting tube oil cylinder is centrally operated, and the impact roller is supported off the ground by the fast support bracket of the impact roller. The transfer tire is under stress, making it convenient for short distance transfers without damaging the road surface.
11. Adopting a specialized combination shock absorber for an enlarged top impact roller (14 sets of large shock absorbers on each steel wheel), with good shock absorption effect and long service life;
12. The parking bracket reduces shock absorption and tire load during parking, and at the same time, the tractor can be quickly disassembled without the assistance of other machinery, making it convenient and fast;
13. Humanized designs such as warning rubber covers and extended fuel ports provide a better user experience.
Inquire Form
