1. The height of the impact compaction wheel is 2580mm (the larger the wheel shape, i.e. the greater the drop, the greater the impact force);

2. Adopting a fully hydraulic buffering and increasing speed system (accumulator, buffering oil cylinder, hydraulic pipe fittings) increases the protection performance of the impact compaction wheel and tractor;

3. By manipulating the lifting tube oil cylinder, the impact roller is supported off the ground by a quick support frame, and the transition tire is subjected to force, allowing for short transitions without damaging the road surface.

4. The spiral compression spring and reverse rotation tension spring on the traction shaft buffer and eliminate the impact of the impact roller on the traction vehicle's recoil force;

5. Adopting a specialized combination shock absorber for larger impact rollers (14 sets of shock absorbers on each steel wheel), with good shock absorption effect and long service life;

6. Personalized designs such as parking brackets, warning rubber covers, and quick support brackets provide a better user experience.

7. The total width of the impact roller design is 2.96 meters (a total width of 3 meters or too close to 3 meters is difficult to achieve precise loading, and exceeding the width will increase additional transportation costs and shipping difficulties. It is not recommended to choose the so-called "larger" design of 3 meters wide by some merchants);

8. The single wheel width of the impact roller is 900mm. Considering that there are very few customers who have special preferences for the "big" parameter, it is also equipped with a 930mm wide wheel (with an overall weight increase of 18 kilograms, which is not significant). The price is the same. However, due to the widening of the wheel, the impact force will be reduced, and there are also two major design defects, which are not recommended for use;

35kj impact roller

model	SL35T
impact energy	35KJ
Part quality	14.5~18T
Best speed range	10~15Km/h
Minimum turning radius	5800mm
compactness	95~98%
Axle shock absorber quantity	14×2×3 pieces
Overall dimensions (length × width × height)	3880×2960×2580mm
Wheelbase	1160mm
Drum wheel width	900mm
Shock absorption method	Hydraulic, nitrogen, spring, rubber, shock absorber
Accumulator normal pressure	3~4.5Mpa
Tire normal pressure	0.6~0.8Mpa

Tag: impact roller compactor for soil stabilization | ground improvement compactor | impact compactor supplier | soil compaction equipment | 35KJ impact roller compactor | impact roller manufacturer | Impact Compactor Manufacturer | Heavy Towing Compactor | Impact Roller Supplier in Saudi Arabia